PRODUCTS LIST Home > Product Show |
FIBRLOK mechanical splice
Product Numbers: 3M Product introduction: |
<
0.1dB insertion loss |
High
performance |
30
seconds installation time |
Increased
productivity |
Minimum
tooling requirements |
Low
cost |
No
epoxy or electricity required |
Easy
on-site installation |
Simple,
easy to use |
Minimal
training, lower cost for installation |
Ability
to reposition fibers |
Improved
splicing yield |
Single
splice for any combination 250µm or 900µm fibers |
Reduced
inventory |
Specification
Fiber
diameter |
125µm |
Coat
diameter |
250
or 900µm |
Shelf
life |
30
years |
Mean
insertion loss |
<
0.1dB |
Reflectance |
<
-35dB from -40oC to 80 oC (-40 to 176 oF) |
<
-55dB typical from -40oC to 80 oC when used with
2650-ACK2 Cleaver Adapter |
|
<
-60dB typical at room temperature |
|
Tensile
strength |
4.4N(1.0lb)
minimum, 13.2N(>3.0 lbs) typical |
Material |
Engineering
thermoplastic with aluminum alloy element, UL 94, V-O rating |